It is possible to make a unique garden design with the Poolline PVC liners.  While making a foil pool, determine the deep and low water areas first. After deciding on the place and shape of the pool, mark the surrounding with a garden hose or a rope. Also deep and low water areas can be marked. Then dig the soil for water layer and apply the lowest layer. Place the foil layer. After making the design, start filling water. After filling water, foil will come to the right position. Then you can cut the foil from the edges and you can use flora layers for covering the edges. This will both fix the PVC layer and will hide the PVC film border.

Properties:

• PVC foil is prepacked.
• An artificial pond foil 12x8 mt
• Made from strong and flexible layer PVC
• Perfect for forming waterproof areas.
• Resistant to tearing out, UV rays and frost.
• Does not contain any poisonous substance
• Plant and animal friendly

You can form your unique pond by yourself easily by this product.

PVC (Liner) Foil Properties:

PVC foil is prepacked. An artificial pond foil 12x8 mt. Made from strong and flexible layer PVC. Perfect for forming waterproof areas. Resistant to tearing out, UV rays and frost. Does not contain any poisonous substance. Plant and animal friendly. Best solution for making an artificial pond or ornamental pool.

Deep water area:  The ideal deep water area of a pool is 100-150cm.  This will prevent the water from freezing in winter and from heating in summer easily. By this, the fish in the pond can be pulled to this deep area easily.

Low water area:  The low water area of a pool is ideally 30-50 cm and can be wider than the deep water area so that you can place plants to this area and it will not be dangerous for animals also.

Coastal area: An outer edge up to 30 cm is very suitable for plant growth. This area can be masked with steep stones, grass and other flora layers.

To startup a foil pond construction:

• First, you should mark the frame.
• Determine the place and shape of your pool. You can use a garden hose or a rope for doing this. You can also mark the deep and low water areas as well.
• Dig the puddle first
• After this, fix the marking and spread the soil layer. The vertical smoothness level of the pool is very important. Cover the deep and low water areas with a 10 cm gravel layer. While digging these places, keep in mind that you will put some material to the base.
• Apply the lowest layer
• Remove all the sharp objects and roots from the pool bed. Apply a sand layer as an extra protection for the foil. Using a strong synthetic material under the foil is also recomended.
• Place the foil layer
• Place the foil to the base of the pool. Leave 30-50 cm from both sides. Fill the water to the pond. Foil will come to the right position slowly. The upper part of the foil must always be higher than the water level. The edges of the foil will be cut.

Covering the edges: Using braided nylon or flora layers is recomended for the edges. This flora will be fixed to the ground by PVC fixing material and after the plants grow, this PVC film will become invisible.